the interesting narrative in his own language: “My attention was first directed to sewing machines late in August, 1850. I then saw in Boston some Blodgett sewing machines, which Mr. Orson C. Phelps was employed to keep in running order. I had then patented a carving machine, and Phelps, I think, suggested that if I could make the sewing machine practical I should make money. “Considering the matter over night, I became satisfied I could make them practically applicable to all kinds of work, and the next day showed Phelps and George B. Zeiber a rough sketch of the machine I proposed to build. It contained a table to support the cloth horizontally, instead of a feed-bar from which it was suspended vertically in the Blodgett machine, a vertical presser-foot to hold the cloth, and an arm to hold the presser-foot and needle bar over the table. “I explained to them how the work was to be fed over the table and under the presser-foot, by a wheel having short pins on its periphery, projecting through a slot in the table, so that the work would be automatically caught, fed, and freed from the pins, in place of attaching and detaching the work to and from the baster-plate by hand, as was necessary in the Blodgett machine. “Phelps and Zieber were satisfied that it would work. I had no money. Zieber offered forty dollars to build a model machine. Phelps offered his best endeavors to carry out my plan and make the model in his shop. If suc
